Xiamen Shuangyuan Springs Co., Ltd 'Blog

Welcome to shuangyuan,manufacturer of gas spring, disc spring, die spring etc.

Prev: Gas Spring Mounting Next:Release Valves

Belleville Springs has a complete range of precision disc springs designed to DIN 2092 and manufactured to DIN 2093, designed for critical loading or dynamic applications.

DIN 2092/2093 disc springs are manufactured to close tolerances and are made from high quality spring steel strip and forgings.

The standard protective surface treatment is phosphate and oiled, however superior surface treatments should be considered for disc springs that are to be situated in hostile environments.

The disc springs are pre-stressed (scragged) and the machining and radiusing of the inside and outside diameters remove stress raisers, which could otherwise reduce disc spring fatigue life.

The DIN 2093 specification classifies disc springs into three groups:
Group 1; 1.25mm up to and inc. 6mm: cold formed-machined (or fine blanked), radiused edges, without contact flats

Group 2; Under 1.25mm thick: cold formed, radiused edges, without contact flats

Group 3; Over 6mm thick: Fully machined from forged blanks, with contact flats, thickness reduced

Click here to get the Trackback URL

Post comment:

◎welcome to give out your point。

About

You're reading:Disc Springs to DIN 2093
xmshuangyuan Published:2011-2-27 18:7:23
Categories:Knowledge of spring
Keyword:disc spring  belleville spring  

Author

shuangyuan

Previous

Comments

Lately left messages

Search

Categories

Archives

Misc

  • RainbowSoft Studio Z-Blog
  • 本站支持WAP访问
  • Archiver列表
  • 订阅本站的 RSS 2.0 新闻聚合

Copyright 2004-2013 Your WebSite. Some Rights Reserved.

Xiamen Shuangyuan Springs Co., Ltd copy right @2006-2008     Address: No.177, Xisanli, Jinshan, Huli, Xiamen, China
Tel: +86(592)5254186   +86(592)5289710       Fax: +86(592)5513310
Email: shuangyuan@springinchina.com    rosecn888@gmail.com
China manufacturer of gas spring,disc spring,die spring,lockable gas spring and compression spring