Mar
7th
Micro compression gas springs offer users many advantages due their small size and low force. Micro springs are also available in 316 stainless steel and in custom strokes and lengths. The table below shows our standard sizes.
| Type | Rod A | Stroke B | Shoulder Length C | Thread G | Oil Damping Zone | K Factor P2/P1 | P1 force (pounds) |
| 4 | .16" | 1" | 3.86" | M4 x .7 .20" | 0.4" | 1.2 | 2 to 34 lbs |
| 1.5" | 4.64" | ||||||
| 2" | 5.82" | ||||||
| 2.5" | 6.61" | ||||||
| 3" | 7.79" | ||||||
| 3.5" | 8.58" |
Gas spring working principle (2011-3-6 18:21:53)
How to adjust the force on a gas spring with an IGS Side Release Valve (2011-3-4 17:44:42)
How to adjust the gas spring pressure (2011-3-3 17:52:1)
Protect the gas spring can do and can not do (2011-3-2 17:54:41)
Friction and Hysteresis (2011-3-1 17:52:36)
Release Valves (2011-2-28 17:55:44)
Gas Spring Mounting (2011-2-27 18:0:15)
Damping (2011-2-25 17:40:19)
Gas spring is how to work? (2011-2-24 17:49:41)
Rigid in Tension Lockable Gas Springs (2011-2-23 17:46:21)
◎welcome to give out your point。
Copyright 2004-2013 Your WebSite. Some Rights Reserved.
Xiamen Shuangyuan Springs Co., Ltd copy right @2006-2008 Address: No.177, Xisanli, Jinshan, Huli, Xiamen, China
Tel: +86(592)5254186 +86(592)5289710 Fax: +86(592)5513310
Email: shuangyuan@springinchina.com rosecn888@gmail.com
China manufacturer of gas spring,disc spring,die spring,lockable gas spring and compression spring
