Xiamen Shuangyuan Springs Co., Ltd 'Blog

Welcome to shuangyuan,manufacturer of gas spring, disc spring, die spring etc.

Prev: compression gas springs Type 6, 8, 10, 14 and 20 Next:Locking Gas Spring

Antimagnetic Materials

Precipitation hardening supplies the strength to these non-magnetic and corrosion-resistant disc spring materials.

NiBe 2 (DIN 2.4132)
NiBe 2 is suitable for use at elevated temperatures. In addition, the disc springs may be exposed, for brief moments (roughly about 1 hour), to temperatures approximately 100 °C higher than those listed in without disturbing their properties.
CuBe 2 (DIN 2.1247)
CuBe 2 is precipitation-hardened copper-beryllium alloy that can be used at severely low temperatures. This alloys low modulus of elasticity enables the disc spring material to generate a significantly lower spring force when compared to other various materials. In addition, it has good electrical conductivity.


Click here to get the Trackback URL

Post comment:

◎welcome to give out your point。


You're reading:Antimagnetic Disc Springs
xmshuangyuan Published:2011-3-8 18:5:43
Categories:Knowledge of spring
Keyword:disc spring  





Lately left messages





  • RainbowSoft Studio Z-Blog
  • 本站支持WAP访问
  • Archiver列表
  • 订阅本站的 RSS 2.0 新闻聚合

Copyright 2004-2013 Your WebSite. Some Rights Reserved.

Xiamen Shuangyuan Springs Co., Ltd copy right @2006-2008     Address: No.177, Xisanli, Jinshan, Huli, Xiamen, China
Tel: +86(592)5254186   +86(592)5289710       Fax: +86(592)5513310
Email: shuangyuan@springinchina.com    rosecn888@gmail.com
China manufacturer of gas spring,disc spring,die spring,lockable gas spring and compression spring