Xiamen Shuangyuan Springs Co., Ltd 'Blog

Welcome to shuangyuan,manufacturer of gas spring, disc spring, die spring etc.

Standard Compression Gas Springs with Metal Ball Socket End Fittings

  • Full Line of standard Compression Gas Springs with Metal Ball Socket End Fittings in stock
  • Black nitride and chrome plated rod finishes:
  • Custom designed springs with metal ball socket end fittings available with unique features such as reduced compression ratio, high temperature seals, food grade oil fill, high speed extension, low friction etc.
  • ...

Standard Compression Gas Springs with Plastic Ball Socket End Fittings

  • Rod finishes include: black nitride and chrome plated
  • Standard stock sizes from 2" to 20" of stroke and forces from 10 lbs. to 1000 lbs.
  • Full Line standard Compression Gas Springs with Plastic Ball Socket End Fittings in stock
  • ...

Threaded End Standard Compression Gas Springs & Struts

  • Springs made from carbon steel, stainless steel and aluminum
  • Full Line of standard threaded end nitrogen filled gas springs and gas struts in stock
  • Engineering support available utilizing our proprietary application design software which calculates optimum mounting points, gas spring size and force, application operating characteristics and ambient temperature effect...

Standard Compression Nitrogen Gas Springs & Struts

We provide engineering support utilizing our proprietary application design software, which calculates optimum mounting points, gas spring size and force, application operating characteristics and ambient temperature effect. We also offer design software services including 3D CAD drawings for direct insertion in your drawing or plan.

...

What is a Compression Gas Spring?

Gas springs have a number of advantages over coil springs.

1.   Typically gas springs have a low compression rate, but if required this can be increased.

...

Combination Gas Springs

LOW K Factor

These gas springs are most useful where a straignt lift is required (i.e.: TV monitors). The difference between the force when the gas spring is fully compressed and the force when it is fully extended will be very small, thus ensuring a near-constant hand force to be applied along its movement.

...

Micro Stainless Steel Gas Springs

Stainless steel gas springs offer users many advantages due their small size and low force. The table below shows our standard sizes. All gas spring parts are constructed of 316 stainless steel. Micro springs are also available in custom strokes and lengths.

...

Stainless Steel Gas Springs Overview

All micro, compression, locking and tension gas springs are manufactured in 316 stainless steel. All others are manufactured to order. The most popular stainless steel compression gas spring sizes are available from stock.

...

Tension Gas Springs

Industrial Gas Springs supplies a complete range of tension gas springs. They retract rather than extend.  Sometimes referred to as traction springs, these units operate the opposite of compression gas springs. Mounting constraints often do not allow for the use of compression springs. Tension gas springs also find many uses as tensioners on mechanical assemblies and belt drives.Examples include doors and access panels hinged horizontally at the bottom and any type of cover or lid that must be pulled open or pulled shut.  In order to accommodate a wide range of force and stroke requirements, IGS offers these units in both mild steel and stainless steel construction in a number of sizes....

Rigid in Compression Lockable Gas Springs

These are similar to the rigid in tension locking springs with oil on both sides of the piston.Conversely when a tensile force is applied, the gas in the nose section will compress permitting a small amount of movement but again, since the oil in the closed end cannot expand, the movement is less than that experienced with a flexible locking spring. When a compressive load is applied to the locked rod, the oil between the piston and the closed end of the tube will not compress and the rod cannot move.However, in the case of a rigid in compression spring the oil is contained in the closed end of the tube and a floating piston retains the gas in the nose bearing end chamber. 

...

Author

shuangyuan

Copyright 2004-2013 Your WebSite. Some Rights Reserved.

Xiamen Shuangyuan Springs Co., Ltd copy right @2006-2008     Address: No.177, Xisanli, Jinshan, Huli, Xiamen, China
Tel: +86(592)5254186   +86(592)5289710       Fax: +86(592)5513310
Email: shuangyuan@springinchina.com    rosecn888@gmail.com
China manufacturer of gas spring,disc spring,die spring,lockable gas spring and compression spring